Distributor Rittal Filter

Distributor Rittal Filter di daerah Jakarta dan di wilayah sekitarnya, silahkan menghubungi PT. Gresindo Mas Utama. PT. Gresindo Mas Utama merupakan salah satu perusahaan yang resmi bergerak di bidang pengadaan suku cadang mesin industri dengan spesialisasi mesin-mesin otomatisasi, salah satu suku cadang yang dipercayakan kepada kami adalah Rittal Filter.

Pelayanan kami sudah bertahun-tahun dalam hal pengadaan kebutuhan suku cadang mesin otomatisasi untuk berbagai jenis industri, berpengalaman dalam pengadaan spare part untuk mesin industri. Perusahaan kami PT. Gresindo Mas Utama adalah perusahaan importir resmi yang mempunyai dokumen Angka Pengenal Impor dan dokumen Nomor Identitas Kepabeanan.

Salah satu suku cadang yang tersedia di kami dari RITTAL FILTER yang merupakan barang resmi dari pabrikan, kami memberikan jaminan terpercaya dan kualitas barang asli. Jadi anda tidak perlu meragukan lagi kualitas barang atau suku cadang dari kami.

Adapun keunggulan dari fitur Produk RITTAL FILTER adalah seperti berikut ini :

  • Kemudahan instalasi Produk RITTAL FILTER tanpa harus menggunakan alat bantu
  • Fleksibilitas dalam penentuan posisi sambungan catu daya
  • Teknologi kipas dengan stabilitas dan aliran udara yang lebih baik dan konstan

Spare part RITTAL FILTER yang tersedia seperti :

Outlet Filters

For filter fan units/outlet filters
When the hose-proof hood is mounted above the
filter fan unit or outlet filter a rating of IP 56 (UL
4X) to EN 60 529/10.91 is achieved. Particularly
suitable for use in the food industry.
Material:
Stainless steel
Painted steel RAL 7035 (light gray)
Gasket: silicone, compliant with FDA 21 CFR
177.2600
Protection Ratings:
In conjunction with the filter fan units/outlet filters,
UL Type 3R, 4 or 4X is met.
UL and cUL recognized
UL file: E76083

Outlet Filters

For ventilation by convection, an outlet filter can
be installed in the upper and lower sections of the
modular enclosure.
Material:
ABS, material resistance to UL 94-V0
Color:
RAL 7035 (light gray)
Note:
EMC version must use EMC spare filter mat for
replacement to ensure EMC shielding

Fine Filters

For filter fans
Used for extremely fine dust with particle sizes
below 10 microns. Made of random filter nonwoven
polyester. Temperature resistant up to
212º F (100º C), self-extinguishing, Class F1
according to DIN 53 438. Anticipate higher air
resistance when fine filter mats are used.
Installation note:
Place fine filter mat behind standard filter mat,
closer to the fan motor.

Speed Control

Temperature-dependent speed control for Rittal
fan and filter units. Dual rated 115/230 V, 50/60 Hz
AC for noise reduction and to save energy in partload
operation.
Technical Specifications:
• For mounting on 35 mm support rail to DIN EN
50 022
• Rated operating voltage: 230 V (AC)/115 V (AC)
• Setting range: +68 to +131° F (+20 to +55° C)
• Phase cross-over controller

Enclosure Thermostat

The enclosure thermostat is particularly suitable
to control filter fans but can also be used to signal
and monitor the temperature inside an enclosure.
Technical Specifications:
• Bi-metal sensor acts as a temperature-sensitive
element with thermal feedback
• Contact: 1 pole, spring loaded switch
elemement
• Permissible contact load:
Category 5 – 3 (heating)
AC 10 (4)1) A,
DC = 30 W
Category 5 – 4 (cooling)
AC 5 (4)1) A,
DC = 30 W
1) = Inductive load at cos j = 0.6
• Setting range 41 to 140° F (+5 to +60° C)
• Weight approximately 4 oz (105 grams)
• Dimensions 3 x 3 x 1″ (71 x 71 x 33 mm)
• Switching difference approximately 1 K ± 0.8 K
• A broad voltage spectrum, just one model
covers 24 to 230 V.
• Time-saving connection technique using a
terminal strip with a screw connection from the
outside.

Hygrostat

The hygrostat switches on the fan when a
preset relative humidity level in the enclosure is
exceeded. This maintains the relative humidity in
the enclosure above the dew point and prevents
condensation in the cabinet or on components.
Technical Specifications:
• Contact population: Single-pole change-over
contact as a quick-break contact
• Permissible contact load:
AC ~ 5 (0.2)1) A
DC = maximum 20 W
1) = Inductive load at cos j = 0.6
• Setting range 50 – 100% relative humidity
• Weight approximately 4 oz (100 g)
• Dimensions 3 x 3 x 1″ (71 x 71 x 33.5 mm)
• Switching difference approximately 4%
• A broad voltage range, only one model covers
24 to 230 V.
• Time-saving connection technique using a
terminal strip with a screw connection from the
outside.
• Flexible mounting on a vertical or horizontal 1″
(35 mm) support rail to EN 50 022, and snap
fastening in the TS/ES enclosure section using
the supplied adaptor.

Catalog TopTherm Rittal Filter

PT. Gresindo Mas Utama juga menyediakan pelayanan penjualan produk spare part dari brand lainnya seperti Eaton Airflex, Suntes Hydraulic, Sae Jin Co Pump, PILZ, Sanyo Denki, Vortex CNC Cooler, Nisse GTR, Parker Taiyo HydraulicTwiflex Disc Caliper, Hitachi Brake MotorSumitomo Cyclo Drive, Hengstler Rotary Encoder, Showa Giken Rotary Joint, Hydac Filter, dan masih banyak lagi brand-brand lainnya.

Untuk pengadaan kebutuhan suku cadang mesin-mesin industri, hubungi kami :
PT GRESINDO MAS UTAMA
Jl. Kelapa Puan XXVI AK6 No.25
Gading Serpong 15810
Tangerang – BANTEN
Telp : 021 – 54221130
Fax : 021 – 5470915
Email : sales.gresindo@gmail.com
WA / HP : 0813 1961 6317 / 0812 981 99333

Ketepatan dan kecepatan dalam hal permintaan kebutuhan suku cadang anda menjadi prioritas kami.